How to use a digital microscope
2022-05-16
Digital microscopes are very common in the market today. Do you know how to use a digital microscope? Next, let me introduce to you the steps of using the digital microscope.
Steps to use the digital microscope:
1. Prepare several large parts of the digital microscope first, and assemble the gimbal bracket first. Here, it should be noted that the brackets for the lens and the camera should be below, and the brackets supporting the display should be placed on the top, which is convenient for observation.
2. Install the lens on the gimbal bracket, and install it inside a circle, just to fix the lens, the lens is relatively fragile, so be careful when installing, and then install the camera on the lens, where is there The diameter of the interface can be plugged in. This step is very important, and you must be careful.
3. After the bracket and the lens are installed, then fix the monitor. After fixing, connect some link cables to it.
Single-tube digital microscopes are used in the detection of semiconductors and integrated circuit boards in the electronics industry, as well as products in the fields of teaching and agriculture. According to its own characteristics, it can be flexibly equipped with ready-made workbench racks for production lines and machine tools of semiconductor and integrated circuit boards.
Steps to use the digital microscope:
1. Prepare several large parts of the digital microscope first, and assemble the gimbal bracket first. Here, it should be noted that the brackets for the lens and the camera should be below, and the brackets supporting the display should be placed on the top, which is convenient for observation.
2. Install the lens on the gimbal bracket, and install it inside a circle, just to fix the lens, the lens is relatively fragile, so be careful when installing, and then install the camera on the lens, where is there The diameter of the interface can be plugged in. This step is very important, and you must be careful.
3. After the bracket and the lens are installed, then fix the monitor. After fixing, connect some link cables to it.
Single-tube digital microscopes are used in the detection of semiconductors and integrated circuit boards in the electronics industry, as well as products in the fields of teaching and agriculture. According to its own characteristics, it can be flexibly equipped with ready-made workbench racks for production lines and machine tools of semiconductor and integrated circuit boards.
The adjustment method of the monocular microscope when the multiple is required: It is realized by replacing the high-power objective lens and eyepiece and the low-power objective lens and eyepiece. When the change of the objective lens and eyepiece cannot reach the required multiple, it can be compensated by the electronic magnification.
