Mounting Press
The mounting press is ideal solution to get high quality, uniform size sample, as well as short process time. It is to use mounting compounds with certain pressure, temperature to make a sample. This automatic hot mounting press machine is suitable for curing different material, such as epoxy resin, phenolic powder, acrylic powder, etc. Suzhou Keystone Mechanical and Electrical Technology Co., Ltd is the manufacturer of the Mounting press in China. We endeavor to provide good quality to you and be your long-term partner in China.
Send Inquiry
Product Description
Mounting press
1.Product Introduction of Mounting press
The Mounting press is a flexible mounting press, with modular mounting unit design, and is combined with one base unit and 1 - 5 mounting units. Meet the different customer's specific needs. The mounting press is suitable for the sample preparation of metallographic cold mounting, especially for epoxy or acrylic cold mounting. Without bubbles and pores samples can be made by putting them into the chamber and curing under pressure, physical and chemical properties of the resin will not change.
2.Product Parameter (Specification) of Mounting press
| Voltage | 10/220V | |
| Heating Power | 1.6kw | |
| Mold Size | <t>30mm(standard),<i>25.4mm,032mm,040mm,<i>50mm(Customized) | |
| Heating Range | 60~2501 | |
| Holding Time | 60 min | |
| Maxpressure | 570 Bar (Depending on mold size) | |
| Pressure Mode | Hydraulic | |
| Control Panel | 7-inch touch screen | Push buttons |
| Cooling Mode | Auto:by temperature or time | |
| Cooling rate | Manual/High/Middle/Low | |
| Depth*With*Height | 561*300*492mm | 550*254*492mm |
| Weight | 60kg | 52kg |
3.Product Feature And Application of Mounting press
1、Modular design of mounting unit to meet customer’s specific needs;2、Sliding closure with automatic open/close;
3、7-inch touch screen with max. 20 commonly procedures;
4、Pre-heating and per-press function to meet the specific mounting requirement of different material;
5、Real-time display the temperature and pressure curve during curing;
6、Individual control of heating/pressing/cooling for every unit.
4.Product Details of Mounting press
1、7-inch HMI, Friendly and simple user interface design;2、Automatic water cooling, with three modes of cooling rate;
3、Sliding closure design for easy opening and closing mold assembly easy to change;
4、Fully hydraulic pressure.
